Base Sheets Documents
Viewing 1 to 5
of 16 results
CAV-GRIP 3V Low-VOC Aerosol Contact Adhesive/Primer can be used for a variety of applications: adhering VersiFleece, standard VersiWeld TPO and VersiGard EPDM membrane to vertical walls, enhancing the bond between Versico's VapAir Seal 725 TR and various substrates, and priming unexposed asphalt prior to applying DASH Adhesive for insulation attachment. Cav-GRIP 3V can also be used with standard TPO membranes as a substrate adhesive on horizontal surfaces for warranties of up to 20 years.
Versico's CAV-GRIP Spray Gun is an industrial grade spray gun for use with CAV-GRIP 3V Adhesive. The ergonomic handle makes it easy to apply bonding adhesive to vertical surfaces. The CAV-GRIP Hose is nylon lined with a braided synthetic yarn reinforcement and synthetic rubber cover, the hose should be used in conjunction with CAV-GRIP 3V Adhesive/Primer and a CAV-GRIP Spray Gun. Two hoses can be attached to one CAV-GRIP 3V cylinder by using the Splitter.
VapAir Seal 725 TR is a 40-mil composite consisting of 35 mils of self-adhering rubberized asphalt laminated to a 5-mil woven polypropylene film.
Versico is excited to introduce CAV-GRIP 3V Adhesive, a revolutionary new product that can be used to bond standard TPO to horizontal substrates. Cav-Grip 3V can be used in the same applications as the previous formulation, including adhering standard TPO and VersiFleece membranes to vertical surfaces. In addition, Cav-Grip 3V is also approved for application of non-VersiFleece EPDM to vertical surfaces.
Show More Results
View All Results
CCW-702 and 702-LV are quick-drying, solvent-based, high-tack adhesives specifically designed to promote maximum adhesion of Carlisle 725TR Air and Vapor Barrier to approved substrates. They are also used as a surface prep to promote adhesion with DASH™ or FAST® adhesives.