Invest in Your Team - 2019 Training Programs Available
December 21, 2018
The world today is truly an ever-changing landscape when it comes to technology and resources. The roofing industry is not immune to such things; with new techniques, products, and systems always being introduced. Construction professionals are specifying and installing more challenging roofing systems constantly - and manufacturers need to ensure that everyone - from representatives to contractors - is on the same page.

Versico has always had a strong commitment to training, consistently offering educational and training opportunities for a variety of levels across the United States and Canada. As a testament to Versico's dedication to training, a 68,000+ square foot Training and Education Center has been built at the Versico headquarters in Carlisle, Pennsylvania. Regional training will still be provided, but this new training center will allow for a large variety of events and training opportunities for years to come.

In new and exciting news, Versico is introducing Foreman Level Training in 2019. This course is intended for individuals who already possess the skills to install single-ply systems, but need a better understanding of inspection guidelines, customer relations, and labor-saving techniques. Covered in these courses will be:
  • Membrane Characteristics and Performance 
  • EPDM, TPO, and PVC Application and Inspection 
  • Project Monitoring and Site Management 
  • Identifying Installation Errors and Remediating the Situation 
  • Overview of site organization and improved team leadership 
If you have any questions at all regarding the training programs available through Versico, please do not hesitate to visit the Versico Training site, view available training programs, or contact the training team at traininginfo@versico.com.
December 5, 2019
Seam Probing

Seam probing is an important final step in the hot air welding process because it is a good indicator to determine if proper fusion has occurred between the membrane layers. Whether the membrane is TPO or PVC, both products need to be probed – but with slightly different techniques. Probing must be done once hot air welds have thoroughly cooled (at least 20 minutes). Premature probing can damage warm seams. Hot air welded seams must be probed throughout the day to check seam quality and to make proper adjustments to hot air welding equipment. The repair of deficiencies must be done routinely throughout the day, but no later than the end of each workday. A blunt or dull cotter pin puller is an acceptable tool to perform the probing task. Versico offers a custom-designed Seam Probe that incorporates an ergonomic, threaded handle with a heat-treated, plated steel tip. With continued use these tools will wear down, creating a tip that is too sharp for probing. Blunting the tip is necessary when this occurs. When a substantial amount of probing is necessary, an extension pole can be threaded into the handle of the Versico probe. This allows the operator to stand up while probing long runs of field seams. Getting started Draw your probing tool tip along the edge of the heat welded seam. Apply firm pressure to probe the seam junction, but not into the bottom membrane sheet. The tool will not penetrate into the lap area of a properly welded seam. If the seam probing tool penetrates into the welded overlap area, use a water-soluble marker to mark the beginning and the end of voids or wrinkles in the seam edge. Repair seam deficiencies as soon as possible using the hand held welder. Versico recommends that repairs be made the same day deficiencies are discovered. Probe repaired seams after they have cooled completely. If the repair is acceptable, wipe off the water-soluble marker lines; if not acceptable, repair the seam using standard heat welded overlay procedures. Another reason all laps must be probed each day soon after they have cooled is to verify the welder set-up is effective. Particular attention must be given to all membrane intersections and heat welded seams at insulation joints. In addition, there should be periodic checks (including at the start of each day) to verify good peel strength. Considerations when probing TPO systems 1.) TPO does not "flow" like PVC. If you observe an area in which you see "flow" of the bottom ply, scorched areas of detail/flashing membrane, or scorched field membrane welds, these areas should be probed. If these areas are overheated to the point of membrane damage, an overlay repair will be required even if the weld probes successfully. 2.) A properly heated field membrane weld will typically have a visual "sheen" approximately 1/2" wide on the bottom sheet at the weld overlap. When walking seams, look for the sheen. If it is not present, probe to ensure weld quality.  3.) TPO seams require a minimum 1.5" weld. Welds less than 1.5" must be overlaid as stated in Versico’s specifications and details, even if probing does not produce deficiencies. Considerations when probing PVC systems 1.) Welds on PVC systems should produce "bleed out". Bleed out refers to the flow of the bottom ply (of the top sheet) outside of the weld. If you do not see bleed out at seam areas, this increases the probability the seam did not receive enough heat when it was welded. Be sure to probe these areas to ensure weld quality. 2.) PVC is a “softer” and more flexible membrane than TPO. As such, a different probe should be used than the one used on TPO roofing systems. The PVC probe should have a blunt/dull tip, or utilize a "hook" screwdriver with a flat head.  3.) PVC seams require a minimum 1.5" weld. If you observe welds which are less than 1.5", these should be overlaid following specifications and details, even if probing does not produce deficiencies. Remember, application of Cut Edge Sealant should not begin until all probing is completed. Please contact Jim Gage with questions.     Jim Gage     Senior Technical Specialist     Product Marketing     james.gage@carlisleccm.com

Read This Post
November 21, 2019
Benefits of Using White P&S EPDM Accessories on TPO Systems

Versico Roofing Systems allows contractors to use several of its productivity-boosting VersiGard® EPDM Peel & Stick accessories on VersiWeld® TPO roofing systems with up to 20-year Total System Warranties. VersiGard White EPDM Peel & Stick (P&S) accessories can provide substantial labor savings on projects with hard-to-flash penetrations and are ideal when using a generator and hand welder isn't practical. Regardless of which roof system is being installed, experienced roofers understand there is always a good chance of encountering hard-to-flash roof penetrations, or simply a high volume of penetrations. Determining the best way to flash these items in a productive manner while ensuring a long-term watertight seal can be a serious challenge. This is where VersiGard White P&S accessories come into play. Keep in mind your alternative EPDM flashing options for TPO systems: Run into a hard-to-flash penetration? VersiGard White P&S Uncured Flashing is an option to consider. This material is highly malleable and adapts easily to odd shapes and surfaces, making it ideal for flashing pipes, scuppers, and other irregularly shaped penetrations. Overwhelmed by hundreds of roof curbs? Boost productivity by flashing curbs with VersiGard 20" White P&S Cured Flashing in conjunction with VersiGard White P&S 7" x 9" Inside/Outside Corners. This is the fastest way to flash roof curbs and can reduce application time by up to 70% when compared to non-P&S flashing options. White EPDM P&S accessories are also a great option for repairs on TPO roofs when access to power is difficult or it isn't practical to use a generator and hand welder. Transporting generators, power cords, and welders to difficult-to-reach roof sections can be cumbersome and labor-intensive. This additional labor can be avoided by white EPDM P&S accessories, since most of these materials will fit snugly into a backpack! If you're interested in receiving a free trial of VersiGard White EPDM Peel & Stick accessories, please submit a request using this form. Approved Products: VersiGard White EPDM P&S Pipe Seals VersiGard White EPDM P&S Pourable Sealer Pockets VersiGard White EPDM P&S Inside/Outside Corners and T-Joint Covers VersiGard White EPDM P&S T-Joint Covers VersiGard White EPDM P&S Uncured Flashing VersiGard White EPDM P&S 20" Cured Flashing     Ryan Ferguson     EPDM Product Specialist     Product Marketing     ryan.ferguson@carlisleccm.com

Read This Post
October 10, 2019
Special Color TPO Accessories

As the demand for different colored roof membranes has grown, Versico introduced its TPO Color Palette with five new colors. In addition to standard white, gray, and tan, Versico’s TPO Color Palette now features Rock Brown, Slate Gray, Terra Cotta, Patina Green, and Medium Bronze. Projects that use special color membrane from the TPO Color Palette usually need flashings and accessories in the same color. Here, contractors have two choices, one of which is painting standard accessories to match the membrane. However, this is a great opportunity to use Versico’s custom TPO accessory program and avoid painting altogether. All of Versico’s custom accessories are available in the five TPO Color Palette colors, as well as white, tan, and gray. Whether it’s a simple split pipe seal or a complex prefabricated curb wrap, Versico can make it in all eight TPO colors and get it to the job quickly. In addition to being available in eight colors, here are some other great advantages to using custom flashings from Versico: • Save time vs. field fabrication: Trying to field-fabricate flashings can be time-consuming work, even for the most skilled and experienced roofers. Using prefabricated flashings saves time. • No need for paint: There’s no need to prime and paint the accessories to match the membrane; just install and go. • Speed: Custom accessories can be fabricated and shipped within days, not weeks. • Quality: All of Versico’s custom TPO accessories carry the Certified Fabricated Accessory (CFA) stamp of approval, indicating they are eligible for coverage as part of Versico’s Total System Warranty. Next time you have a project using Versico’s TPO Color Palette TPO, consider using custom accessories to make the job faster and easier to install. VersiWeld TPO Special Color Painting Guide  VersiWeld TPO Special Color Program Custom Accessory Quote Request Form      Adam Burzynski     TPO Product Manager     Product Marketing     adam.burzynski@carlisleccm.com

Read This Post
X
Email to your Colleagues >
Separate multiple emails with a comma or semicolon.
Copy Me


Please log in to share this item by email.
Add to a Collection >
Please log in to share this item to your collections.
Private
Private Collection (Change)

Loading...
Invite user by email:
User Invited. Invite another
User Invite Failed, try again.
X
Visibility Options
Public Collection
Anyone with a link can view. No sign-in required.
Private Collection
Only people explictly granted permission can access. Sign-in required.
X

You are now working in your copied collection
Okay